Reflective Insulation Certified R-Value 17)
![blackfacing](https://insulationdisc.wpengine.com/wp-content/uploads/2023/07/blackfacing.png)
Wholesale Instructions
Insulation is delivered in 7 to 10 days. Questions call 1- 888-355-7346
- Review the posted prices below.
- Fill out an ORDER form to purchase from a LISTED price or fill out a CUSTOM quote form.
- You will be emailed proposal within 24 hours.
- Then pay the LOW profit amount that same day. Pay the full insulation cost within 3 days.
![Screen Shot 2023-06-30 at 1.48.33 PM](https://insulationdisc.wpengine.com/wp-content/uploads/2023/06/Screen-Shot-2023-06-30-at-1.48.33-PM.png)
![](https://insulationdisc.wpengine.com/wp-content/uploads/2023/07/Screen-Shot-2023-07-18-at-11.00.26-AM.png)
Sq. Ft. | TRUE WHOLESALE INSULATION PRICING | + Profit Amount | Your DELIVERED Cost |
700 | $660 | $350 | $1,010 |
1400 | $974 | $350 | $1,324 |
2100 | $1,459 | $350 | $1,809 |
2800 | $1,598 | $350 | $1,948 |
3500 | $1,923 | $350 | $2,273 |
4200 | $2,248 | $450 | $2,698 |
4900 | $2,573 | $450 | $3,023 |
5600 | $2,897 | $450 | $3,347 |
6300 | $3,222 | $450 | $3,672 |
7000 | $3,300 | $450 | $3,750 |
7,700 | $3,498 | $450 | $3,948 |
8,400 | $3,789 | $450 | $4,239 |
9,100 | $4,080 | $450 | $4,530 |
9,800 | $4,378 | $450 | $4,828 |
10,500 | $4,602 | $450 | $5,052 |
11,200 | $4,889 | $450 | $5,339 |
11,900 | $5,175 | $450 | $5,625 |
12,600 | $5,462 | $450 | $5,912 |
13,300 | $5,749 | $450 | $6,199 |
14,000 | $5,916 | $450 | $6,366 |
- Must be same specifications
- Competitors company with a live agent
- Standard Specifications
- Installation Process
- Program Video
- Order To Delivery Process
The Best Insulation for Metal Buildings and Pole Barns
- Available High R-Value – 15.3 (white facing), 17 and 22 (reinforced reflective facing)
- It is ICC-ES Recognized (The ICC-ES does independent testing)
- R-Value unaffected by outside humidity
- It prevents 97% of radiant transfer (the primary source of heat flow)
- Is a vapor barrier
- Prevents condensation
- 19 dba contact noise reduction
- 90 Celsius (194 F) contact temperature rating
- UV resistance
- Center is polyethylene foam instead of air bubbles.
- Material does not allow mold or mildew
- Does not provide for nesting or rodents, bugs or birds
- Easy seals around nails (no leaks)
- 100% recyclable virgin raw materials; therefore eco -friendly.
- Its surface keeps it airflow
- Lighter weight; therefore, less cumbersome installation than fiberglass batt
- Significant price savings over fiberglass batt and spay of same R-Value standard
- Delivery times (fiberglass average delivery is 2 to 3 weeks vs. reflective is 7 to 10 days).
Included in Custom Quote
- Type of insulation
- Number of rolls
- Width of rolls
- Length of rolls
- Total square ft of insulation
- Thickness of insulation
- R-Value
- Wholesale Delivered Cost
- Profit Amount
For more information, click Reflective Info Guide
![](https://insulationdisc.wpengine.com/wp-content/uploads/2023/07/reflectivearrows.png)
![](https://insulationdisc.wpengine.com/wp-content/uploads/2023/07/3reflect.png)
![](https://insulationdisc.wpengine.com/wp-content/uploads/2023/07/Screen-Shot-2022-07-27-at-1.15.23-PM.png)
Installations Procedures:
The installation situation you have will determine the required materials you’ll need.
- Reflective or Double-Sided Tape
- Steel sealant
- Metal Pins and Caps
- Knife
- Heat Gun
- Reflective Tape – purpose is to seal the seams. This is applied to Reflective (White facing). It is not need with R17 because there is a adhesive already on the rolls and for R22, a heat gun is used to seal the seams.
- Double-Sided Tape purpose is to make sure the insulation doesn’t blow away during the installation process as well as helps attach insulation to the surfaces and seals seams.
- Steel Sealant – Is a super glue that is used to attached insulation with the metal pin to surfaces such as wood, aluminum, steel and much more.
- Metal Pins and Caps – Are used to attached insulation to surfaces such as wood, aluminum, steel and much more.
- Knife – To cut insulation
- Heat Gun – Purpose is to seal the seams on our R22
![](https://insulationdisc.wpengine.com/wp-content/uploads/2023/07/Screen-Shot-2023-07-13-at-2.26.40-PM.png)
Reflective Tape
![](https://insulationdisc.wpengine.com/wp-content/uploads/2023/07/Screen-Shot-2023-01-23-at-10.20.34-AM.png)
Double Sided Tape
![](https://insulationdisc.wpengine.com/wp-content/uploads/2023/07/Screen-Shot-2023-07-13-at-2.27.34-PM.png)
Metal/Steel Sealant
![](https://insulationdisc.wpengine.com/wp-content/uploads/2023/07/Screen-Shot-2023-07-13-at-2.28.01-PM.png)
Metal Pins
![](https://insulationdisc.wpengine.com/wp-content/uploads/2023/07/Screen-Shot-2023-07-13-at-2.28.06-PM.png)
Caps
Installation for New Metal Building Construction
- The first step is to apply double-sided tape on purlins to keep insulation from blowing away
- Then simply roll the insulation (whether reflective or fiberglass) perpendicular to the purlin.
- The insulation should sag approximately 2′ inches to create a air-cap.
- It is best to purchase reflective tape or double-sided tape to seal each seam. If you are purchasing our R-Value 17, it has an adhesive attached to the rolls (picture on the right); therefore, you don’t need seam tape. If you are purchasing an R-22, it seals with a Heat gun (picture in the middle).
- Lastly, attached sheeting.
![](https://insulationdisc.wpengine.com/wp-content/uploads/2023/07/install1.png)
![](https://insulationdisc.wpengine.com/wp-content/uploads/2023/06/Screen-Shot-2023-06-30-at-1.47.51-PM-300x190.png)
The hot gun is used to seal seams for R-Value 22
![](https://insulationdisc.wpengine.com/wp-content/uploads/2023/06/r2.png)
R-Value 17 has adhesive tape on the roll!
Installation for New Pole Barn Construction
- Apply double-sided tape on top of framing to keep insulation from blowing away.
- Then roll the insulation (whether reflective or fiberglass) perpendicular to the purlin.
- Have cap nails, screws with locking washers. Alternative is 1/2″ staples to directly attach the insulation to the wood framing.
- Again, for best performance, create a airspace of 3/4″ or more. 3/4″ furring strips are great. Another option to create an airspace is to push the insulation in a few inches.
- Again if you have purchased R 15.3 (white), tape the seam with reflective tape.
Insulation steps for Erected Steel Structures
The retrofitting instructions refer to buildings with or without prior insulation layers. It also refers to buildings that already have sheeting installed.
![](https://insulationdisc.wpengine.com/wp-content/uploads/2023/07/install2.png)
![](https://insulationdisc.wpengine.com/wp-content/uploads/2023/07/install3.png)
Tubular Buildings
- The insulation is rolled perpendicular to the framing. Don’t be concerned about the space between the framing because the insulation is laying the opposite direction.
- The insulation is attached using self -drilling screws. We recommend 3/4″ screws with locking washers.
- If you are buying Reflective (white facing) R15.3, purchase reflective tape to seal seams. This is not needed with R22 or R17 orders. With R22, the seams are attached with a heat gun. With R17, there is adhesive attached to each roll.
I -Beam and Web Steel Structures
Two common insulation methods used below
Method 1: The insulation is attached with the use of pins and caps.
Items needed: Reflective tape, Metal Sealant, Pins and caps
- Start by putting a glob of glue on base of the pin. Then press the pin on to the sheeting. Space the pins 1 every square foot. It will take approximately 24 hours for glue to fully secure.
- Push the insulation through the pin. Once done, put the cap on the pin to secure the insulation
- Then snip the end of the pins.
Method 2: Your insulation is attached with double sided and glue
- A line of glue and double side tape should run adjacent to each other on the bottom on the I-beam. The tape is a short-term hold and the glue is a longer-term hold.
For best performance, make sure to have a 3/4″ air -cap or more. Also, make sure you seal the seams.
Insulation Steps for Erected Pole Barn Structures
The retrofitting instructions refer to buildings with or without prior insulation layers. It also refers to buildings that already have sheeting installed.
Retrofitting Insulation between purlins and girts
- When attaching insulation between The Framing
Use cap nails, and screws that have locking washers. The alternative is 1/2″ stables. For best results, leave air 1″ air gap.
![](https://insulationdisc.wpengine.com/wp-content/uploads/2023/07/Screen-Shot-2023-07-13-at-2.31.06-PM.png)
![](https://insulationdisc.wpengine.com/wp-content/uploads/2023/07/Reflective-Insulation-Installation.png)
Step #1- Fill out an Order Form or Custom Quote Form
Fill out an ORDER FORM if you wish to receive an invoice for one of the Fiberglass or Reflective prices posted online. Fill out a CUSTOM QUOTE FORM if you want a different size or R-Value than what is posted. Once you have submitted a form, a representative will call, then email an invoice within 24 hours. Questions call 1-888-355-7346.
Step #2 – Sign Contract and Pay Profit Amount
Insulation Discounted is the only seller that transparently lists the profit amount separately from the wholesale cost. After receiving your quote, simply sign the purchase order and pay the profit amount that same day. You are guaranteed a minimum of $200 net savings below market quotes of equal specifications. The average savings is 10%.
![direction arrow](https://factorysteeloverstock.com/wp-content/uploads/2017/10/blue-arrow-3-narrow-down-150x150.png)
- Fiberglass Insulation Orders – Pay the listed profit amount to Insulation Discount, then you pay the wholesale cost directly to our certified Insulation supplier within 3 business days.
- Reflective Insulation Orders – Pay the full insulation cost (wholesale price + profit) to Insulation Discounted after (same day) receiving the formal quote.
Step #3 – Get a Confirmed Scheduled Delivery Date
Customers receive a call within 48 hours of delivery that confirms the arrival time and delivery date.
![informational arrow](https://factorysteeloverstock.com/wp-content/uploads/2017/10/blue-arrow-3-narrow-down-150x150.png)
- Fiberglass & Reflective Insulation Orders – Reflective Insulation orders are delivered within 7 to 10 days. Fiberglass Insulation orders are delivered within 2 to 3 weeks.
Step #4 – Accept Materials and Sign for Delivered items.
Again, the process from Order to Delivery is simple: Just have someone present to sign for insulation materials when received.
![informational flow](https://factorysteeloverstock.com/wp-content/uploads/2017/10/blue-arrow-3-narrow-down-150x150.png)
- Insulation Orders – Please take a minute to verify all ordered materials have arrived in good condition before you sign the bill of label document.